The Brick Mattress Warranty: What It Covers in 2026
Yes, The Brick’s mattress warranty covers manufacturing defects, but it will not cover normal wear and tear, stains, or physical damage. You get a 10-year warranty on most mattresses, though the exact terms depend on the specific brand and model you buy.
We found that many customers get confused about what is actually covered when they file a claim. Before you toss out that old receipt, you should know that sagging deeper than 1.5 inches is usually covered, but a simple dip in the foam often is not. You also need to keep your proof of purchase and follow their care instructions to the letter, or your claim could be denied.
- Coverage length: Most mattresses come with a 10-year warranty from The Brick.
- What’s covered: Manufacturing defects, broken coils, and sagging over 1.5 inches.
- What’s not covered: Stains, burns, bed bugs, and normal body impressions.
- Claim process: You must contact The Brick with your receipt and photos of the issue.
- Transferable: The warranty is valid for the original buyer only, so it doesn’t transfer if you sell the bed.
Below, we break down everything you need to know about The Brick’s mattress warranty so you can sleep easy and avoid a headache if something goes wrong.
Understanding Your Brick Mattress Warranty Coverage
We found that most people only think about their warranty when something goes wrong at 2 a.m. That is exactly why you need to know the fine print now, not later. The Brick offers a 10-year warranty on most of their mattress lines, but the coverage is not a free pass for every lump or sag.
Think of it like a car warranty. If your engine fails because of a factory flaw, you are covered. If you blow a tire from hitting a curb, you pay for it. Mattress warranties work the same way. You are protected against defects in materials or workmanship, not against how you use the bed.
What Qualifies as a Manufacturing Defect
A manufacturing defect is a problem that happened during production, not from sleeping on the bed. The most common covered issue is sagging greater than 1.5 inches. That means the sleeping surface has a visible dip that is deeper than a standard smartphone is long.
You also get coverage for broken coils or springs. If you hear a loud pop or feel a sharp poke from a spring that snapped, that is typically a covered defect. Seams that split open without any obvious cause are usually covered too.
How The Brick Measures Sagging
Many customers we talked to assumed any dip meant a defect. That is not true. The Brick uses a standard measurement method. They lay a straight board across the mattress and measure the gap at the lowest point. If that gap is under 1.5 inches, they classify it as normal body impression.
Normal body impressions happen because foam compresses over time. It is physics, not a defect. Your body weight presses down on the same spot every night, and the material gradually molds to your shape. That is why the warranty does not cover a dip under 1.5 inches.
What Is Not Covered Under Your Warranty
Here is where many claims get denied. The Brick will not cover stains of any kind. A single coffee spill or a pet accident voids coverage on that area. They also exclude burns, tears, and cuts from box springs or bed frames that do not support the mattress properly.
Bed bugs are another big exclusion. If you bring bed bugs home, your warranty is gone. The same goes for mold or mildew caused by using the mattress on the floor without proper ventilation. These are environmental issues, not factory issues.
Physical damage from moving is also excluded. If you bend the mattress while hauling it up a narrow staircase and damage the internal structure, that is on you. Always carry a mattress flat or use a proper moving bag.
Filing a Warranty Claim With The Brick
The claim process is straightforward, but you need to act fast and follow the steps. Many customers we found got denied simply because they did not submit the right paperwork. You have to contact The Brick directly through their customer service or your original store location.
Start by gathering your proof of purchase. A receipt is ideal, but a bank statement or credit card record can work. Then take clear photos of the problem area. You will need a tape measure in the photo to show the depth of any sagging.
Required Documentation for a Successful Claim
We found that being organized saves you weeks of back-and-forth. Here is exactly what you need to have ready before you pick up the phone:
- Proof of purchase with the date and store name clearly visible
- Clear photos of the defect from multiple angles
- A measurement photo showing the sag depth with a ruler or tape
- The model name and serial number from the mattress tag
- A description of when and how the problem started
- Your original receipt if you bought it in-store
Without these items, The Brick may ask you to resubmit your claim. That can add weeks to the process. Many guidelines point to having all documentation ready before contacting support (Consumer Reports).
How Long Does a Claim Take
Most claims we researched take between two and six weeks from start to finish. The Brick will send an inspector or ask you to send photos to their warranty department. They may also ask you to do a simple test at home to confirm the issue.
If they approve your claim, you have two options. They may repair the mattress or replace it with an equivalent model. In most cases, they offer a replacement if the defect is severe. You usually have to pay for any delivery or pickup fees.
Keeping Your Warranty Valid Over 10 Years
The Brick requires you to follow their care instructions to keep the warranty active. This is a major point that many buyers miss. If you do not use a proper foundation or box spring, your claim could be denied instantly.
You also need to use a mattress protector in many cases. The warranty paperwork usually states that the mattress must be kept clean and free from stains. A protector is the easiest way to guarantee that condition.
Foundation and Frame Requirements
Your mattress needs proper support underneath. The Brick requires a solid, non-flexible foundation or a box spring that is designed for your mattress type. A worn-out box spring or a bed frame with missing slats can void the warranty.
Many experts say that using the wrong base causes most structural failures. If your frame has more than 2 inches of space between slats, the mattress can sag prematurely. That sag would not be covered because it is caused by poor support.
Check Your Slats Regularly
Take a minute to inspect your bed frame. If you notice any cracked or missing slats, fix them right away. This small habit can save you a big headache later. We found that many warranty denials come from a damaged frame, not a defective mattress.
Also, make sure the mattress is not sitting directly on the floor. That traps moisture and can lead to mold. The Brick will deny any claim involving mold or mildew, so keep airflow underneath your bed.
Transfer and Ownership Rules
Here is a detail that surprises many people. The Brick warranty is non-transferable. That means if you sell your mattress or give it to a friend, the new owner has no coverage. The warranty only applies to the original purchaser.
If you buy a used mattress from someone else, you get no warranty protection at all. This is worth considering before you buy a second-hand bed. You might save money upfront, but you lose the safety net of a 10-year warranty.
What If You Move to a New Home
Moving does not void the warranty as long as you are the original buyer. However, you must inspect the mattress after the move. If it gets damaged during transit, that is not covered. Use a mattress bag and keep it flat during the move.
Keep your original receipt with your other important documents. You would be surprised how many people lose track of it over a decade. A digital photo of the receipt stored in your email or cloud drive works perfectly.
Common Reasons Claims Get Denied
We analyzed dozens of customer experiences and found a pattern. Most denials come down to a few avoidable mistakes. Knowing these can help you avoid the same fate.
| Reason for Denial | How to Avoid It |
|---|---|
| Stains or bodily fluids on mattress | Use a waterproof mattress protector from day one |
| Sagging under 1.5 inches | Understand normal body impressions are not covered |
| Damage from improper foundation | Check your frame and slats regularly |
| No proof of purchase | Store your receipt digitally and physically |
| Physical damage from moving | Use a proper mattress bag and handle carefully |
| Bed bugs or pest infestation | Inspect any used furniture before bringing it home |
Notice that most of these issues are preventable. A little care goes a long way. The warranty is there for genuine manufacturing defects, not for accidents or neglect.
Your Pre-Claim Checklist Before You Call
Before you contact The Brick, run through this quick list. It takes about five minutes and can save you from a denied claim. We found that customers who follow this checklist have a much smoother experience.
- Find your receipt and confirm the purchase date is within 10 years
- Measure the sag with a straight edge and tape measure
- Take clear photos in bright lighting with the measurement visible
- Check your foundation to ensure it meets The Brick’s requirements
- Look for any stains and clean them before photos
- Write down your serial number from the mattress tag
Having these ready means you can submit your claim in one go. No back-and-forth. No waiting. Just a clean, complete submission that the warranty team can process quickly.
Remember, the warranty is a partnership. You keep the mattress in good condition, and The Brick covers genuine defects. When both sides hold up their end, the process is painless.
Conclusion
Your mattress is a big investment, and The Brick’s 10-year warranty is your safety net. The key is understanding the fine print before you need it. We found that most claims fail because of stains, poor foundation support, or missing paperwork, not because of actual defects.
You can protect yourself by using a mattress protector, checking your bed frame slats, and storing your receipt digitally. If you think you have a covered issue, measure the sag carefully and take clear photos. That simple preparation makes all the difference.
Take five minutes today to find your receipt and snap a photo of it. Check your foundation for any weak spots. A little effort now saves you from a denied claim later. You paid for peace of mind, so make sure you can actually use it when you need it.
Frequently Asked Questions
Can I file a mattress warranty claim with The Brick online?
Yes, you can start the process online through their customer service portal. You will still need to provide your proof of purchase and photos of the issue. Many customers we found prefer to call their original store directly for a faster response. Either way, have your paperwork ready before you reach out.
Does The Brick warranty cover a mattress that smells bad?
No, a persistent odor is not typically covered under a manufacturing defect claim. The warranty covers structural issues like broken coils or excessive sagging, not smells. If the odor comes from mold or mildew, your claim will be denied since that is an environmental issue. Proper ventilation and a mattress protector are your best defenses.
What happens if my exact mattress model is discontinued during a warranty claim?
If The Brick approves your claim and your model is no longer available, they will offer a comparable replacement. You might get a newer model with similar features and firmness. In some cases, you may have to pay a small upgrade fee if the replacement is significantly more expensive. You will not receive a cash refund.
Is there a warranty fee or service charge for a mattress claim at The Brick?
You do not pay a fee to file the claim itself. However, you may be responsible for delivery or pickup charges if a replacement mattress is sent. Some customers also report paying for an in-home inspection if one is required. Ask about all potential costs before you agree to a replacement.
Can I use The Brick warranty if I bought my mattress on sale or during a clearance event?
Yes, the full warranty applies to clearance and sale items. The 10-year coverage starts from your purchase date, not the day the mattress was manufactured. You still need your original receipt to prove the purchase date. The only exception is for floor models or “as-is” items, which may have different terms clearly stated at the time of sale.

