Queen Mattress 78×60: Sizing, Fit & Buying Guide
A queen mattress measures 60 inches wide by 80 inches long, not 78×60. If you are looking at a mattress labeled 78×60, you are likely looking at an older or non-standard queen size, often called a “full queen” or a “short queen,” which is 60 inches wide by 78 inches long. This size is typically 2 inches shorter than a standard queen, and it’s most commonly found in RV campers, bunk beds, or older homes where space is tight.
We found that the difference between 78×60 and the standard 80×60 queen matters a lot when buying new sheets or a bed frame. A standard queen is the second most popular mattress size in the US, and most bedding is made for that 80-inch length. If you have a 78-inch mattress, regular queen sheets will likely be too long and may bunch up at the foot of your bed.
- The core answer: A 78×60 mattress is a “short queen,” not a standard queen (80×60).
- Where it’s used: Most common in RVs and recreational vehicles to save floor space.
- Potential issue: Standard queen sheets and comforters will not fit perfectly—they will be about 2 inches too long.
- What to buy: Look for “RV queen” or “short queen” fitted sheets specifically designed for this size.
- What to check: Always measure your current mattress before ordering any new bedding or frame.
Below, we break down exactly how to measure your bed, what to look for when shopping for this uncommon size, and how to find the right linens without the guesswork.
Understanding the 78×60 Mattress: What You Are Actually Looking At
You are likely staring at a short queen mattress, and that is completely different from the bed in most American homes. The standard queen size in the US is 60 inches wide and 80 inches long. When you see 78×60, you have found a mattress that trades two inches of legroom for better use of limited floor space. We found that this specific dimension is almost exclusively built for the RV industry, though some older studio apartments and custom bunk setups use it too. The good news is that the 60-inch width stays the same, so you don’t lose any side-to-side sleeping room compared to a standard queen.
Why This Size Exists in the Market
The RV industry drives the demand for this odd length. Manufacturers build mattresses at 78 inches long to fit into the tight floor plans of campers and motorhomes. You sacrifice two inches at the foot of the bed so that the slide-out room closes properly or so that you have more aisle space in the middle of the vehicle. Many experts say that the short queen is the unofficial standard for recreational vehicles built after the 1990s. If you buy a used camper, there is a high probability that the original mattress measures 78×60, not the standard 80-inch version.
You might also find this size in a few niche settings. Some custom built-in bunk beds in older homes use this length to accommodate a sloped ceiling or a wall protrusion. It is rare, but it happens. Always confirm the exact measurements of your bed frame before you purchase anything, because a standard queen frame will not hold a 78-inch mattress properly without a gap or overhang.
Measuring Your Bed Frame and Mattress Correctly
Before you buy a single sheet or a new mattress, you need to verify what you have. A tape measure is your best friend here. We found that people often assume the size based on the bed frame, which leads to costly mistakes. The label on an old mattress is often worn out, so you must measure it yourself. Lay the tape measure flat along the center of the mattress, not along the edge, because the fabric and padding can skew the numbers. Measure the length from the top seam to the bottom seam. Then, measure the width from the left side to the right side at the middle point.
For most RV mattresses, you will get 78 inches in length and 60 inches in width. If your numbers show 80 inches long, you have a standard queen, and you can shop normally. If you get 78 inches, you need to shop specifically for short queen or RV queen accessories. Write down those measurements and keep them with your owner’s manual for that camper or bed frame. That way, you never have to guess again when it is time to replace bedding or the mattress itself. Measuring is a five-minute job that will save you a lot of headaches later.
Checking the Mattress Thickness as Well
While you have the tape measure out, check the thickness too. RV short queen mattresses often come in thinner profiles than residential models. A typical residential queen mattress measures between 10 and 12 inches thick. In contrast, many RV mattresses are only 6 to 8 inches thick. This is done to keep the weight down and to fit into shallow platform bases. You need this number when you buy fitted sheets because deep-pocket sheets designed for a 12-inch mattress will be loose and slip right off a 6-inch mattress. Write down all three dimensions: length, width, and thickness.
Shopping for a New 78×60 Mattress
When you start searching for a replacement, you need to use the right keywords. Search for “RV queen mattress” or “short queen mattress” instead of just “queen.” Most major online retailers have a specific category for this size, but you have to dig a little to find it. We found that brick-and-mortar mattress stores rarely stock this size on the showroom floor. Your best selection will be online, where manufacturers ship directly to your home or campground. Expect to see foam models dominate this category because they are lightweight and easy to compress for shipping.
Price is another differentiator. Because this is a specialty size, it can sometimes cost slightly more than a standard queen of similar quality. Production runs are smaller, so the cost per unit is higher. That said, you can still find budget-friendly options in the $300 to $500 range if you stick with basic foam. If you want a hybrid with innersprings or a luxury pillow-top, be prepared to pay more. Always check the return policy carefully, as some RV-specific mattresses are final sale due to hygiene reasons.
Mattress Types That Work Best for RVs
Memory foam is the most popular choice for this size. It conforms to your body and can be compressed tightly for shipping, which is a huge advantage when you are picking it up at a distribution center. Many experts say that gel-infused memory foam is better for temperature regulation because campers tend to get warm in the summer months. Latex is another good option if you want something more durable and naturally cooling, but it will be heavier and pricier. Innerspring options exist, but they are less common and often heavier than a foam equivalent.
Thickness matters more in an RV than it does in a house. You have to consider the height of your bed frame and whether you want under-bed storage. A thicker mattress means less vertical space for storage bins underneath. Many RVers prioritize storage, so a slim 8-inch profile is often the sweet spot. It gives you decent comfort without eating into your cargo space. Try to balance comfort with practicality when you are making your final decision.
Finding Bedding That Fits a 78×60 Mattress
This is where most people get tripped up. Standard queen sheets are made for an 80-inch length. If you put them on a 78-inch mattress, the extra two inches of fabric will gather at the foot of the bed. That creates wrinkles, bunching, and a general mess that will drive you crazy at 2 AM. You have two options: buy custom short queen sheets or convert a standard fitted sheet. We recommend buying the custom ones because they are made to fit your exact dimensions and will stay snug through the night.
Look for labels that say “RV queen” or “short queen” when shopping for sheets. Many online marketplaces and specialty RV supply stores carry these in a variety of thread counts and materials. The fitted sheet will have the correct 78-inch length and 60-inch width, with deep pockets designed to hold a mattress up to 10 inches thick. If your mattress is notably thinner, look for sheets with an adjustable elastic drawstring to keep them tight.
Do You Need Special Comforters and Duvets?
Yes, you should get a comforter designed for a short queen as well. Standard queen comforters are about 86 inches long and 86 inches wide. A short queen comforter will be slightly shorter in length, which prevents the drape from dragging on the floor at the foot of the bed. If you already own a standard comforter, you can make it work by tucking the extra material under the mattress at the foot. This actually looks intentional and can keep the blanket from shifting. But if you want the cleanest look, invest in an RV-specific comforter set.
Fitted sheets are the most critical purchase. Flat sheets and blankets are more forgiving because you can tuck them in. The fitted sheet is the one that needs to match exactly. We found that buying a short queen fitted sheet is the single best upgrade you can make for your sleep quality in an RV. It eliminates the wrinkles and the slipping, and it makes the bed look much neater. You can usually buy just the fitted sheet separately from a set, which saves you money if you already have a standard flat sheet you like.
How the 78×60 Size Compares to Other Bed Dimensions
| Mattress Size | Width (inches) | Length (inches) | Best Use Case |
|---|---|---|---|
| Full/Double | 54 | 75 | Single sleeper, small rooms |
| Short Queen (RV) | 60 | 78 | Campers, tight spaces |
| Standard Queen | 60 | 80 | Most US bedrooms |
| King Split | 76 | 80 | Adjustable beds, couples |
Notice that the short queen shares the exact same width as the standard queen. That means you get the same shoulder and hip room. The only difference is two inches in length. For most adults under 6 feet tall, that missing two inches is barely noticeable. However, if you are taller than 6 feet, you might find your feet hitting the edge of the mattress. In that case, you might want to consider a custom solution or a standard queen with a smaller frame base.
Where You Often See This Odd Size
Besides RVs, this size pops up in other unexpected places. Some boat cabins and marine berths use a 78×60 mattress because the hull curves inward at the foot. Tiny houses on wheels also commonly use this size to save precious square footage. It is also occasionally found in truck sleeper cabs for long-haul drivers. The common thread is that these are all spaces where every inch of length matters. If you live in a tiny house or a boat, you probably already know how valuable that 2 inches is.
When you are dealing with any of these spaces, always measure the sleeping platform first. In boats, the berth might be an odd shape with curved corners. In that case, a standard rectangular short queen might not be enough. You might need a custom-cut foam mattress to match the hull shape. Many marine supply companies offer custom cutting services, but they cost more and take longer to ship. If you have a rectangular opening, the standard 78×60 will fit perfectly. If you have curved edges, custom is the way to go.
Converting a Standard Queen Bed Frame to Fit
If you have a standard queen frame but you are considering switching to a short queen, think twice. The frame is built for an 80-inch mattress. A 78-inch mattress will sit on that frame with a two-inch gap at one end. That gap is a serious hazard because the mattress can slip off the frame and drop you to the floor in the middle of the night. We strongly advise against this setup unless you can modify the frame. You can install a wooden filler block at the foot of the frame to close the gap, but that is a DIY project that requires some skill.
The reverse situation is more common: you have a short queen frame and you are considering upgrading to a standard mattress. That will not work either. The standard mattress will overhang the frame by two inches, which puts stress on the edges and can cause premature sagging. The mattress may also stick out into the aisle of your RV, which is a trip hazard. In short, match the mattress to the frame. Do not try to force a standard mattress into a short queen space or vice versa. The size exists for a reason.
Quick Checklist Before You Purchase
- Measure the platform length from the very top of the frame to the very bottom, not the mattress. You need the wood or metal dimensions.
- Measure the platform width at the widest point, usually the middle. It should be close to 60 inches but verify first.
- Check the existing mattress label if it is still readable. It will state the exact dimensions for comparison.
- Decide on your mattress thickness based on your storage needs and your ability to climb in and out easily.
- Order sheets labeled “RV queen” or “short queen” to ensure a proper fit. Do not rely on standard queen fitment.
- Confirm the return policy before ordering. Specialty sizes sometimes have restocking fees that can take you by surprise.
Final Thoughts on Sleep Quality with This Size
Do not let the odd dimensions discourage you. A 78×60 mattress can be just as comfortable as a standard queen if you set it up correctly. The key is to buy the right accessories. You need the right sheets, the right comforter, and the right foundation. Once those are in place, the mattress functions exactly like any other bed. Many RV enthusiasts actually prefer this size because it forces them to be intentional about their belongings and their sleep space. You have a cozy, defined sleeping area that is perfect for a camper or a compact home. For more on choosing the right mattress type and firmness, see our general mattress buying guide.
Remember that your sleeping position matters just as
Conclusion
You now know that a 78×60 mattress is a short queen, built for RVs and compact spaces. The main takeaway is simple: standard queen bedding will not fit your 78-inch bed properly. Your next step is to grab a tape measure and confirm your exact dimensions before buying anything. Once you know your length, width, and thickness, you can confidently order an RV queen mattress and matching sheets. Do not settle for ill-fitting bedding. A properly fitted short queen setup feels just as comfortable as a standard bed at home. Take the measurement, shop smart, and enjoy a great night’s sleep.
Frequently Asked Questions
Will regular queen sheets fit a 78×60 mattress?
No, they will not fit properly. Standard queen sheets are made for an 80-inch length. They will hang over the foot of your mattress by two inches and bunch up while you sleep. You need to buy sheets labeled “RV queen” or “short queen” for the best fit.
Can I use a standard queen mattress on a short queen frame?
You should not do this. The standard queen mattress will overhang the frame by two inches on one end. That overhang creates stress on the mattress edges and can cause sagging. It can also become a trip hazard in a small space like an RV.
Is a 78×60 mattress the same as a full-size bed?
No, it is wider. A full-size mattress is 54 inches wide, while the 78×60 short queen is 60 inches wide. You get six extra inches of shoulder and hip room with the short queen. The short queen is closer in width to a standard queen, just shorter in length.
What thickness should I choose for an RV short queen mattress?
We found that an 8-inch thickness works well for most RVs. It offers decent comfort without being too heavy or bulky. Thicker mattresses take up vertical space and may reduce under-bed storage. If you need more storage, consider a 6-inch profile instead.
Can I buy a 78×60 mattress in a regular mattress store?
Most brick-and-mortar stores do not carry this size on their showroom floor. You will have better luck shopping online with retailers that specialize in RV products. Search for “RV queen mattress” or “short queen mattress” to find the best selection and competitive prices.

